Operation
1. Power Switch & Volume
1. Turn the POWER switch on.
The LED display light up.
2. Use the volume control
switch to adjust the
volume to your desired
level
Note: If the LED display has not light up after you turned on the piano, please check
the power supply.
If the piano is silent, the volume may be adjusted to its minimum level.
2. Voice/Dual Voice
3. Metronome
Select a voice by pressing
one of the [VOICE TYPE]
button,the corresponding
indicatorwill light up and the
number of the selected voice
will appear on the LED.
Press the [DUAL] button to
enter the Dual Voice mode,
then select the second voice
by pressing a [VOICE TYPE]
button.
To quit the Dual Voice mode,
press the [DUAL] button again.
While recording, Voice 2 will
turn off automatically.
Press the [METRONOME]
button to turn on/off the
metronome function.
You cannot use the
metronome function when
the DEMO song is playing.
You can also turn off the
metronome by pressing
the [STOP] button.
10
To Next Page
Loading...
Need help?
General
