thomann Millenium MPS-1000 - SETUP Menu and Device Settings

6.3 ‘SETUP’ menu
Various device settings can be customised in the Setup menu. The parameters set
here aect the entire drum module and cannot be changed by changing the drum
kit.
1 Main menu
2 Parameter
3 Values
4 Scroll bar
1. Press [SETUP] to enter the menu.
2.
Use / to select the desired parameter.
ð
The selected parameter appears in red.
3. Change the value with the rotary control or with [–] | [+].
4. Press [–] | [+] simultaneously to restore the value set before the change.
5.
Some parameters have submenus. In this case, is displayed to the right of
the value. Press [ENTER] to switch to the submenu
ð
Details on the respective parameter are displayed.
6. Press [EXIT] to exit the menu.
ð
A dialogue appears on the display.
7. Press [ENTER] to save the changes or press [EXIT] to exit the menu without
making any changes.
The following parameters can be changed with the rotary control or with [–] | [+]:
Parameter Function
‘BACK VOLUME’ Song volume preset
‘CH.MUTE’ Mutes some parts of the song.
‘O’ No muting
‘Accomp’ Mutes parts other than the drums in the song.
‘Drum’ Mutes the drums in the song.
‘PLAY MODE’ Playback mode for songs
‘PlayOne’ A single song is played once
‘PlayAll’ All songs are played once
$
ö #
%
Operating
MPS-1000
19