1. Press the [KIT] button.
ð
The first kit appears on the display.
2. Use the rotary control [–] / [+] to select the desired kit.
The preprogrammed sounds of the drum module can be programmed to any of the connected
pads. So you can create user kits and store them in the device. To do so proceed as follows:
1. First, call up one of the available drum kits (see previous chapter) and use [EDIT] to
switch to Edit mode.
2. Hit the pad (Trigger) to which you want to programme a certain sound or press [DRUM]
repeatedly until the desired pad is shown on the display. Additionally select the specific
trigger for multiple assigned pads.
Customising a drum kit
Operating
MPS-750
25
To Next Page
Loading...
Need help?
General
