Turn on the DUAL voice
The indicator goes off.
2¡
3¡
4¡
1¡
Press the [DUAL] button to turn on the DUAL mode,
the VOICE flag on the LED and the indicator are both
lightened. The dual voice number is also displayed on
the LED.
Then, you can get two different sounds at the same
time when you press one key on the keyboard.
Use the [+] / [-] button and voice Direct Select buttons
to select your desired voice. The default voice number
is 007.
Press the [DUAL] button again to turn off the DUAL
mode, the indicator goes off.
Select a dual voice
VOICE
STYLE
SONG
Voice flag is lightened
Two voices will sound
at the same time.
Eg. Piano
STR. TRIO
Dual
The piano has dual voice. You can create the new sound through this function for richer and punchier
sounds. you can get two different sounds at the same time when pressing one key in the right area in the
keyboard.
11
While the keyboard is in split mode, only the right
hand area can respond the dual voice, the left
hand not below split point would respond.
NOTE:
VOICE
STYLE
SONG
2¡
3¡
1¡
VOICE
STYLE
SONG
Display split parameter
Change split point
The indicator is flashing.
VOICE
STYLE
SONG
Melody
area
Chord
area
Default split
point F#3
You can split the piano to melody and chord
area by this function.
Press the [SPLIT] button, LED displays the current
split parameter XXX .
Use the [+] / [-] button or Keyboard to change it, after
exit the setting mode the new value becomes to the
new split point, the split default value is 34.
The new split point belongs to the left area of the
keyboard.
Split Point
To Next Page
Loading...
Need help?
General
