17
EN
CD and mp3 Playback
Loading Discs
1. Press SOURCE repeatedly to select CD mode.
2. Press OPEN/CLOSE to open the disc
compartment.
3. Insert up to 5 discs with label face up.
4. Press OPEN/CLOSE again to close the
disc compartment.
The occupied disc tray icons light and the current
disc number shows on the display.
If the disc is a mp3 CD, the mp3 icon lights on the
display.
Play and Pause Discs
• Press PLAY/PAUSE in stop mode to
begin playback.
•Press PLAY/PAUSE during playback to to
pause disc. Press again to resume.
Play and load simultaneously by:
1. Press OPEN/CLOSE to open the disc tray
while a CD is playing.
2. Load/change discs for available trays.
3. Press OPEN/CLOSE again to close the
tray.
Stop Playback
During playback, press STOP to stop playback.
Selecting a Disc
•Press DISC 1, DISC 2, DISC 3, DISC 4, or
DISC 5 on the main unit to directly access the
corresponding disc.
•Press DISC SKIP on the remote control to skip
discs.
Searching Through a CD
• Press SKIP BACKWARD / SKIP
FORWARD to skip to the previous or
next track.
•Press and hold SKIP BACKWARD / SKIP
FORWARD to search through a CD
while it is playing.
Attention:
Do not push to force closing of the tray
during CD playback or tray opening.
Note:
Be sure to remove all discs from the disc
compartment before moving or transporting
the unit!
To Next Page
Loading...
