THOMSON CS580 - Music Management Software; Connecting Audio System to Computer; Establishing USB Connection

Connecting the Audio System to
the Computer
Connect the audio system to your computer with
the USB cable provided. Connect the smaller end
of the USB cable to the USB port ( )on
the back of the audio system and the larger end
to the USB port on the computer.
Establishing USB Connection
1. Open MusicMatch Jukebox on your PC (Refer
to “Launch MusicMatch Software” on page
8)
2. Turn on the unit by pressing the ON/ECO
button.
3. Select USB source on the audio system by
pressing SOURCE on the main unit or USB on
the remote control.
CONNECTED is displayed when USB connection
is detected.
NO CONNECT is displayed when no USB
connection is detected.
7
EN
Music Management Software
MAIN SPEAKERS 6Ω
RL
_
+
AC
USB
CONNECTED
USB
NO CONNECT
Note:
When USB source is selected, music
playback can be controlled using
MusicMatch Jukebox.
For more information on MusicMatch
Jukebox, go to www.musicmatch.com
.
CS580 EN 6/10/04 2:25 PM Page 12