Electric Golf Buggy – E4000 & E4000S
E&OE © 2020 Thomson 8
Assembly and Setup
1. Identify the Left and Right wheels by locating the L and R sticker on the inside of the wheels. To
identify which side to place the wheels, stand behind the buggy, the right wheel is needs to be
installed on your right and the left on your left.
2. Attach the wheels to the axles by pushing the wheel locking button (E) on the outside of the wheel
and inserting the axle extension into the wheel.
Ensure to keep the locking button on the outside of the wheel pushed in during this process.
This is in order to enable the axle extensions, including the two pins, to be inserted all the
way into the wheel.
If not locked in, the wheel will not be connected to the clutch and cannot be moved. Test the lock by
trying to pull the wheel out.
To Next Page
Loading...