EasyManua.ls Logo

THOMSON MIC200IDABBT - Getting Started; Safety and Warnings; General Safety Guidelines

THOMSON MIC200IDABBT
220 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- EN 1 -
Getting Started
Remove the appliance from the box.
Remove any packaging from the product.
Place the packaging inside the box and either or dispose of safely.
Safety and Notice
Read and understand all instructions before you use this product. If damage is caused by failure to
follow the instructions, the warranty does not apply.
Safety
Warning
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical equipment.
Keep this apparatus away from direct sunlight, naked Fames or heat.
Never look into the laser beam inside this apparatus.
Ensure that you always have easy access to the power cord, plug or adaptor to
disconnect this apparatus from the power
The apparatus shall not be exposed to dripping or splashing and no liquid-lled
objects, such as vases, shall be placed on the apparatus.
To ensure complete disconnection from the power input, the mains plug of the
apparatus shall be disconnected from the mains.
The mains plug of the apparatus must not be obstructed OR must be easily
accessed during intended use.
Minimum distances 10 cm around the apparatus for sufcient ventilations
The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.
No naked ame sources such as lighted candles should be placed on the apparatus
Attention should be drawn to environmental aspects of battery disposal
The use of apparatus in moderate climates.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Getting Started 1
Safety and Notice 1
Care for your product 2
Care of the environment 2
What’s in the box 3
Description of Parts 4
Power 5
DAB Radio mode 5
Changing DAB stations 6
Scanning for DAB stations 6
Prune DAB stations 6
Storing a DAB station preset 6
Tune to a DAB station preset 6
DAB Display Information 7
Dynamic Range Control (DRC) 7
FM Radio Mode 7
Changing the Scan Setting 8
Display Language 11
Software Version 11
Factory Reset 11
Playing a compact disc (CD) 11
Remarks: 15
Contents

Table of Contents

Related product manuals