3
Operating the Radio
Tuning the Stations
1. Plug the power cord into any 230V AC
household outlet.
2. Press ON/OFF (located on the top of the
radio) to turn on the radio.
3. Slide the FM/MW(RR60M/Q only, FM/
LW for RR60L) switch to the desired
broadcast band.
4. Turn TUNING to select a station.
5. Press ON/OFF to turn off the radio
Built-In AFC
The Built In Automatic Frequency Control
(AFC) works only on FM. It helps reducing
drift on FM reception and keeping the
EN
radio locked in on the FM station to which
it is tuned.
When tuning FM stations, you may notice
that the station you are tuning can be
well-tuned on two or three nearby points
on the dial. Always tune carefully at the
loudest and clearest point.
Notes: RR60Q is a built-in Quartz
version, recommended to use in
eastern European countries.
RR60 EN 9/10/02, 5:28 PM4
To Next Page
Loading...
