E-DOC-CTC-20060911-0017 v2.0
Chapter 2
Basic Installation
21
2.6 Basic Security
Default user name and password
The Thomson Gateway comes with a default user. Its user name is ‘Administrator’ and the default password
is blank.
Changing your password
For security reasons, it is recommended to set a password to access the Thomson Gateway. Proceed as
follows:
1 Go to the Thomson Gateway home page (http://dsldevice.lan
or 192.168.1.254).
2 In the left pane, choose Toolbox > User Management.
3 In the Pick a task list, click Change my password.
4 Enter a new password and confirm.
i
Do not forget this logon information or you will be forced to reset the Thomson Gateway back
to its default configuration.
To Next Page
Loading...
