After replacing the freezer compartment door, screw the
middle hinge back onto the opposite side.
Unscrew the blocks from the bottom of the fridge door and then fit them to the opposite side.
Fit the fridge compartment door back into place. Refit the
upper hinge on the opposite side and connect the wire.
Fit the left hinge cover to the upper hinge
and fit the
top cover to the appliance using
the screws.
TIPS FOR SAVING ENERGY
For the most energy efficient use of your appliance:
x Ensure your appliance has adequate ventilation as recommended in the installation instructions.
Ensure the door is aligned horizontally
and vertically so that the
seals are closed on all
sides before finally tightening the hinge.
Ensure the door is aligned hor
izontally and
vertically so that the
seals are closed on all sides
before finally tightening the hinge.
To Next Page
Loading...
