THOMSON TX 807 C - User Manual

TX807 C/CS
Updated 03 / 02 First issue 03 / 00
INFORMATION - INFORMATIONS - INFORMATIONEN -
INFORMAZIONE - INFORMACIONES
OUT OF PRODUCTION MODE :
To set TV into “out of production mode” (letter P at the screen):
- Press the VOL - button on the TV keyboard until the letter “P” disappears.
SORTIE DE MODE PRODUCTION
Pour sortir le téléviseur du mode production (lettre P à l’écran):
- Appuyer sur la touche VOL- du clavier du téléviseur jusqu'a la disparition de la lettre "P" .
VERLASSEN DES PRODUKTIONSMODE:
"Lautstärke -" am Nahbedienfeld drücken bis der Cursor am linken Anschlag ist und dann noch weitere
ca. 10 s halten bis das eingeblendete "P" verschwindet.
USCITA DA PRODUCTION MODE:
Per uscire dalla condizione " Production mode" (lettera P presente suulo schermo)
- Premere il tasto-volume sulla tastiera comandi del TV fino a che la lettera "P" scompare.
SALIDA DEL MODO PRODUCCION.
Para salir del 'modo producción', (aparece una letra P en la pantalla):
- Mantener pulsada la tecla "Volumen -" del teclado hasta que la letra "P" desaparezca.
EN
FR
DE
IT
ES

Summary

Out of Production Mode Instructions

English Instructions

Instructions to exit 'out of production mode' by pressing VOL- on the TV keyboard.

French Instructions

Instructions to exit 'mode production' by pressing VOL- on the TV keyboard.

German Instructions

Instructions to exit 'Produktionsmode' by pressing VOL- on the front panel.

Italian Instructions

Instructions to exit 'Production mode' by pressing Volume- on the TV.

Spanish Instructions

Instructions to exit 'modo producción' by pressing 'Volumen -' on the keyboard.

Location of Controls and Components

Picture Adjustments

G2;Cutoff Adjustment

Adjusting G2/Cutoff using the SCREEN control with peak white pattern.

Focus Adjustment

Adjusting focus using the FOCUS control for a sharp picture.

System Voltage and Geometry Introduction

Main System Voltage Adjustment

Adjusting main system voltage for TV to AV black test pattern.

Geometry Mode Alignment Overview

Introduction to geometry mode alignment and East-West Module adjustments.

Service Mode Operation

Service Mode Access Procedure

Steps to enter the Service Mode using the RCU and mains switch.

Service Menu Navigation and Adjustment

How to navigate menus, select lines, and make adjustments within the Service Menu.

Storing Values and Exiting Service Mode

Procedures for saving adjusted values and exiting the Service Mode.

Alignment Parameters and Default Values

Set Lines and Controls Configuration

Parameters and default values for Set Lines (INT, OFF, SC, OSDCONTR).

Geometry Line Adjustment Parameters

Parameters and default values for Geometry Lines (HS, VS, VA, SC, VSH).

Video, Processor, and IF Line Settings

Parameters and default values for Video Lines, Video Processor, and IF Lines.

Geometry Mode Alignment Procedures

90° Tube Geometry Adjustment

Procedure for adjusting geometry on 90° tube TVs using test patterns.

110° Tube Geometry Adjustment

Procedure for adjusting geometry on 110° tube TVs, including East-West Module.

THOMSON TX 807 C Specifications

General

Brand	THOMSON
Model	TX 807 C
Category	TV
Language	English