What to do if there is no power on my THOMSON easytv 40FD2S13 TV?
Check if the AC cord of the TV is properly plugged in. If there's still no power, disconnect the plug and reconnect it to the socket after 60 seconds. Then, turn the power back on.
What to do if my THOMSON easytv 40FD2S13 TV signal is not received properly?
If there are high buildings or mountains nearby, adjust the image through manual operation, consulting the instruction of vernier regulation, or adjust the direction of the external antenna. If you are using an indoor antenna, adjust its direction for optimum reception or consider switching to an external antenna.
Why does my THOMSON easytv 40FD2S13 have static noise affecting video and audio quality?
Check if the antenna at the back of the Thomson TV is connected properly.
What to do if my THOMSON easytv 40FD2S13 has no picture?
First, check if the antenna at the back of the TV is properly connected. Then, view other channels to see if the problem persists.
What to do if my THOMSON easytv 40FD2S13 TV video appears with no audio?
First, try increasing the volume. Also, check if the TV’s sound is on mute.
What to do if my THOMSON TV has broken lines on the screen?
Electrical appliances like hair dryers or vacuums may be interfering with your TV. Try switching these appliances off.
What to do if my THOMSON easytv 40FD2S13 problems are unresolved?
Unplug the power cable and wait for 30 seconds, then reconnect to the socket.
How to fix no video in PC mode on THOMSON easytv 40FD2S13 TV?
Check if the cable is correctly connected to the VGA port, and ensure the cable isn't bent.
How to clear horizontal tearing in PC mode on THOMSON easytv 40FD2S13?
Adjust the horizontal placement of the screen to clear any horizontal lines.
How to adjust screen brightness in PC mode on THOMSON easytv 40FD2S13 TV?
Adjust the brightness or contrast in the main menu.
Critical warnings and guidelines for safe TV operation and handling.
Important safety advice and instructions for mounting the TV on a wall.
Illustrates and explains the use of various input/output ports for connections.
Explains the function of each button on the TV remote control for operation.
Guidance on placing the TV and connecting power and antenna.
Solutions for no power, poor signal reception, and picture problems.
Addresses issues with sound, remote functionality, and general device response.
To Next Page
General