THOMSON VPH7090 - Clock Setting Procedures

EN
8
If the programme number matches the pictures you are viewing, press key to
go on to the next programme .
If the programme number does not correspond to the pictures, scroll the channel
numbers with key or . Validate with .
For a scrambled channel (example: CANAL+), refer to page 18 (New channel)
and tick off the Decoder option.
When you have assigned proper numbers to all of the channels, press
to leave the menus.
...AND CLOCK SETTING
• THE TIME
• THE DAY
• THE DATE
Call up the SUMMARY menu with key .
With key or ,
select the line Installation and press .
Select the line Clock set with key
or and press .
The menu CLOCK SET is displayed.
If the time displayed is incorrect or was not transmitted, press (line Auto
clock).
When the function “automatic clock setting” is not available or is unsuitable, set
successively day, month, time and year as explained below:
Select with or and modify with or .
Store with .
Leave with .
Your video recorder is fitted with an automatic time setting device.
In most countries, channels (TF1, ARD, RAI UNO, BBC1, ARTE) broadcast signals to set
The time will normally be set correctly after the automatic installation. Take care that the
time corresponds to your time zone if you receive foreign channels.
6
1
2
I-T7089PE-GB/BEI/906 20/07/99 18:14 Page 8