INSTALLATION INSTRUCTIONS
INSTALLATION OF YOUR APPLIANCE
5. Position the unit to allow free air flow through the front grille.
6. Wipe out inside of unit with a damp cloth.
7. Be sure to install the Anti-Tip brakcet. Follow the instructions provided with the Anti-
Tip bracket kit.
To reduce the risk of tipping the unit by abnormal usage or improper loading, the appliance must be
secured by properly installing the anti-tip device packe with the appliance.
• Take the fixing bracket (2 pcs) and screws (2 pcs) out of the instruction packet.
• Drill holes into the floor according to the dimensions shown below. This will allow you to fix the
brackets to the door. (image 1).
• Push the appliance into its place of installation. (image2).
• If he unit is not stable, pull out the appliance and repeat the previous step unitl the unit is stable.
NOTE: If the unit relocated, the bracket must be removed and installed in the new location.
!
The Anti-Tip Kit must be installed on this unit before it is used. Double stacking
units may cause serious personal injury.
Image 1 Image 2
To Next Page
Loading...
