2. Align mounting holes on the back of range hood with mounting
screws on the wall. Place range hood on the screws and fasten
the screws.
3. Use the auxiliary screws provided to secure the range hood.
FIX THE AIR OUTLET
1.Use the sealing strip provided in the accessories bag and
place it around the air outlet joint cover by one circle and make
sure there is no air leakage.
2.Using 4 screws provided to install the joint cover onto the
range hood.
DUCT FIXING
Caution:To reduce the risk of tire,use metal ductwork only.(Metal
duct should be able to easily sourced from local hardware
stores.)
1. Attach an adequate length of 7” round duct on the top theΦ
outlet adapter.
2.Secure the duct using fastener. Make sure the duct is tixed well
on.
INSTALLATION & USE
10
To Next Page
Loading...
