Need help?Do you have a question about the THORENS TD 1500 and is the answer not in the manual?
Instructions for replacing the stylus on the Ortofon 2M Bronze cartridge and other 2M series models.
Guidance on cleaning records and ensuring the stylus diamond is clean.
Steps for safely packaging the turntable for transport or shipping.
Step-by-step guide for replacing the turntable's cartridge with a new model.
How to adjust the counterweight for cartridges with varying weights to ensure proper balance.
Instructions for correcting the vertical angle of the diamond needle relative to the record groove.
Guidance on adjusting the tone arm height for optimal playback with different cartridges.
Steps to align the sub-chassis and adjust spring tension for vertical vibration and height consistency.
Instructions for replacing the stylus on the Ortofon 2M Bronze cartridge and other 2M series models.
Guidance on cleaning records and ensuring the stylus diamond is clean.
Steps for safely packaging the turntable for transport or shipping.
Step-by-step guide for replacing the turntable's cartridge with a new model.
How to adjust the counterweight for cartridges with varying weights to ensure proper balance.
Instructions for correcting the vertical angle of the diamond needle relative to the record groove.
Guidance on adjusting the tone arm height for optimal playback with different cartridges.
Steps to align the sub-chassis and adjust spring tension for vertical vibration and height consistency.
General| Drive System | Belt drive |
|---|---|
| Type | Manual Turntable |
| Motor | Electronically controlled DC motor |
| Tonearm | Thorens TP 150 |
| Platter | Aluminum |
| Speed | 33 1/3, 45 rpm |
| Dimensions | 420 x 150 x 360 mm |
To Next Page
