Need help?Do you have a question about the THORENS TD 150/II and is the answer not in the manual?
Instructions for installing a pick-up cartridge into the TP 50 plug-in shell using provided hardware.
Guidance on setting cartridge height for optimal stylus tip position relative to the shell bottom.
Details the four color-coded leads (Red, Green, White, Blue) for connecting cartridge channels to the shell terminals.
Explains the factory wiring of right and left channel phonoconnectors and the ground connection system.
Steps to adjust the vertical tracking angle by loosening screws, inserting the shell, and tightening.
Describes how to set the stylus overhang for optimal tracking distance from the tone arm bearing.
Details the process for achieving longitudinal and lateral balance and setting the correct stylus force using counterweights.
Explains how to adjust the anti-skating force using a test record or distortion analysis for optimal playback.
Instructions for mounting the tone arm onto the base for special TD 150/Mk II variants.
Guidance on securely mounting the TD 150/Mk II turntable onto a furniture board to minimize vibrations.
Instructions for installing a pick-up cartridge into the TP 50 plug-in shell using provided hardware.
Guidance on setting cartridge height for optimal stylus tip position relative to the shell bottom.
Details the four color-coded leads (Red, Green, White, Blue) for connecting cartridge channels to the shell terminals.
Explains the factory wiring of right and left channel phonoconnectors and the ground connection system.
Steps to adjust the vertical tracking angle by loosening screws, inserting the shell, and tightening.
Describes how to set the stylus overhang for optimal tracking distance from the tone arm bearing.
Details the process for achieving longitudinal and lateral balance and setting the correct stylus force using counterweights.
Explains how to adjust the anti-skating force using a test record or distortion analysis for optimal playback.
Instructions for mounting the tone arm onto the base for special TD 150/Mk II variants.
Guidance on securely mounting the TD 150/Mk II turntable onto a furniture board to minimize vibrations.
To Next Page
General
