Need help?Do you have a question about the THORENS TD 115 and is the answer not in the manual?
Warns against exposing the appliance to rain or moisture to prevent fire or shock hazards.
Explains the velocity-sensing electronic shut-off for motor and tone arm, ensuring friction-free operation.
Explains how to set the antiskating force based on tracking force and stylus shape using the scale.
Details connecting the turntable's signal and ground wires to amplifier or receiver inputs.
Explains how to operate for automatic playback, including speed selection and tone arm lift.
Details the terms and conditions of the THORENS factory warranty for defective parts and repairs.
Explains reporting defects and obtaining warranty service, including required information.
Warns against exposing the appliance to rain or moisture to prevent fire or shock hazards.
Explains the velocity-sensing electronic shut-off for motor and tone arm, ensuring friction-free operation.
Explains how to set the antiskating force based on tracking force and stylus shape using the scale.
Details connecting the turntable's signal and ground wires to amplifier or receiver inputs.
Explains how to operate for automatic playback, including speed selection and tone arm lift.
Details the terms and conditions of the THORENS factory warranty for defective parts and repairs.
Explains reporting defects and obtaining warranty service, including required information.
General| Drive System | Belt Drive |
|---|---|
| Speeds | 33, 45 rpm |
| Tonearm | TP 30 |
| Anti-skating | Yes |
| Effective length | 230 mm |
| Effective mass | 12.5 g |
| Offset angle | 23 degrees |
| Weight | 6.5 kg |
| Platter | non-magnetic |
| Motor | DC motor |
| Wow and Flutter | 0.05% |
To Next Page
