Need help?Do you have a question about the THORENS TD 124 DD and is the answer not in the manual?
Instructions for carefully removing the device from packaging and placing it in its intended location.
Details on levelling the turntable chassis using adjustable feet and spirit level.
Guide to assembling the anti-skating weight mechanism on the tonearm base.
Instructions for fitting pick-up systems with SME bayonet mount to the tonearm.
Guide on selecting and fitting the correct tonearm weight for the pick-up system.
Steps to set the recommended tracking force for the cartridge using the tonearm dial.
Procedure for adjusting the Vertical Tracking Angle (VTA) by modifying tonearm height.
How to set the needle to a precise 90° angle to the record surface for accurate scanning.
Details on connecting the external power supply unit TPN 124 to the turntable.
Guidance on connecting the TD 124 DD to a phono preamplifier or amplifier.
Instructions for placing LPs and singles correctly on the turntable platter.
How to select playback speed, start, stop, and use the platter brake.
Explanation of the electric tonearm lift for safe lowering and raising of the needle.
Using the stroboscope to precisely adjust the platter's rotational speed.
Instructions for carefully removing the device from packaging and placing it in its intended location.
Details on levelling the turntable chassis using adjustable feet and spirit level.
Guide to assembling the anti-skating weight mechanism on the tonearm base.
Instructions for fitting pick-up systems with SME bayonet mount to the tonearm.
Guide on selecting and fitting the correct tonearm weight for the pick-up system.
Steps to set the recommended tracking force for the cartridge using the tonearm dial.
Procedure for adjusting the Vertical Tracking Angle (VTA) by modifying tonearm height.
How to set the needle to a precise 90° angle to the record surface for accurate scanning.
Details on connecting the external power supply unit TPN 124 to the turntable.
Guidance on connecting the TD 124 DD to a phono preamplifier or amplifier.
Instructions for placing LPs and singles correctly on the turntable platter.
How to select playback speed, start, stop, and use the platter brake.
Explanation of the electric tonearm lift for safe lowering and raising of the needle.
Using the stroboscope to precisely adjust the platter's rotational speed.
General| Type | Direct Drive Turntable |
|---|---|
| Motor | Direct Drive |
| Platter | Aluminum |
| Speed | 33 1/3, 45 RPM |
| Tonearm | TP 124 |
To Next Page
