Need help?Do you have a question about the THORENS TD-150 AB and is the answer not in the manual?
Defines standard conditions for subjectively evaluating turntable rumble and noise performance.
Guidance on inspecting, cleaning, and replacing the rubber drive belt for optimal function.
Procedures for applying lubricant to the motor's upper and lower bearing assemblies.
Instructions for correcting motor azimuth to ensure accurate speed and belt tracking.
Troubleshooting steps for the on-off switch, including contact checks and common faults.
Guides for voltage conversion and motor replacement for different power standards.
Adjusting the turntable's floating chassis springs for vibration isolation and balance.
Defines standard conditions for subjectively evaluating turntable rumble and noise performance.
Guidance on inspecting, cleaning, and replacing the rubber drive belt for optimal function.
Procedures for applying lubricant to the motor's upper and lower bearing assemblies.
Instructions for correcting motor azimuth to ensure accurate speed and belt tracking.
Troubleshooting steps for the on-off switch, including contact checks and common faults.
Guides for voltage conversion and motor replacement for different power standards.
Adjusting the turntable's floating chassis springs for vibration isolation and balance.
General| Drive System | Belt Drive |
|---|---|
| Tonearm | TP 13 |
| Suspension | Spring Suspension |
| Platter Material | Aluminum |
| Speeds | 33, 45 RPM |
| Weight | 8.5 kg |
To Next Page
