Need help?Do you have a question about the THORENS TD 170-1 and is the answer not in the manual?
Connecting the record player to the mains and audio system using plugs.
How to readjust the tone arm's start position for accurate record groove entry.
Confirmation of conformity with international safety regulations for the device.
Recommendation for stylus inspection and replacement for optimal playback.
How to set the playback speed for different record types.
Pre-setting record diameter for automatic operation based on vinyl size.
Procedure for initiating automatic playback by setting the tone arm.
Steps for manually starting playback and lifting/lowering the tone arm.
How to stop playback, either automatically or manually.
Connecting the record player to the mains and audio system using plugs.
How to readjust the tone arm's start position for accurate record groove entry.
Confirmation of conformity with international safety regulations for the device.
Recommendation for stylus inspection and replacement for optimal playback.
How to set the playback speed for different record types.
Pre-setting record diameter for automatic operation based on vinyl size.
Procedure for initiating automatic playback by setting the tone arm.
Steps for manually starting playback and lifting/lowering the tone arm.
How to stop playback, either automatically or manually.
General| Type | Belt-drive audio turntable |
|---|---|
| Product color | Black |
| Wow & flutter | 0.12 % |
| Nominal speeds | 33 1/3, 45, 78 RPM |
| Output voltage | 4 mV |
| Signal-to-Noise Ratio (SNR) | 68 dB |
| Frequency range | 10 - 22000 Hz |
| USB ports quantity | - |
| AC adapter frequency | 50/60 Hz |
| AC adapter input voltage | 100 - 240 V |
Weight and Dimensions| Weight | 5500 g |
|---|---|
| Platter weight | 400 g |
| Platter diameter | 304 mm |
| Product dimensions (WxHxD) | 440 x 119 x 360 mm |
To Next Page
