Rev 22 Feb 2019
Page 5
Chapter 2 Safety
Chapter 2 Safety
2.1 Safety Information
For the continuing safety of the operators of this equipment, and the protection of the
equipment itself, the operator should take note of the Warnings, Cautions and Notes
throughout this handbook and, where visible, on the product itself.
The following safety symbols may be used throughout the handbook and on the
equipment itself.
2.2 General Warnings
Warning: Risk of Electrical Shock
Given when there is a risk of injury from electrical shock.
Warning
Given when there is a risk of injury to users.
Caution
Given when there is a risk of damage to the product.
Note
Clarification of an instruction or additional information.
Warning
If this equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired. In particular, excessive
moisture may impair operation.
Spillage of fluid, such as sample solutions, should be avoided. If spillage does
occur, clean up immediately using absorbant tissue. Do not allow spilled fluid to
enter the internal mechanism.
Although the unit does not emit radiation, it does redirect laser radiation emitted
from other devices. Operators must follow all safety precautions provided by the
manufacturer of any associated laser devices.
Caution
When connecting the driver boards and motors use only the cables supplied.
Do not extend the cables. The driver boards and motors are calibrated with
these cables. Using different cables will affect the performance of the system.
To Next Page
Loading...
Need help?
General
