THORLABS TSP01 Quick Start

© 2012 Thorlabs
3 Operating Instruction
11
3 Operating Instruction
After installation of the software connect the TSP01 to a free USB2.0 port.
The operating system recognizes a new
device and automatically installs the
device drivers.
Start the GUI from the desktop icon.
At the first connect, you will be prompted to select the
preferred unit for temperature display. Click "OK" to
confirm your choice. The software now automatically
connects to the TSP01, and the actual temperature and
relative humidity, measured on the internal sensor, are
displayed. If an external sensor is connected, it will be
recognized and enabled automatically; it's temperature
will be displayed then.

THORLABS TSP01 Specifications

General

Brand	THORLABS
Model	TSP01
Category	Measuring Instruments
Language	English