Need help?Do you have a question about the THORLABS PM5020 and is the answer not in the manual?
General| Calibration | NIST Traceable |
|---|---|
| Display | LCD |
| Power Supply | 9 V Battery or AC Adapter |
| Analog Output | 0 - 2 V |
| Detector Type | Silicon |
Information on product codes and optional accessories for the PM5020.
Specifies PC hardware and software requirements for remote operation.
Lists all items included in the PM5020 package.
Describes the front and rear panel controls and displays of the PM5020.
Instructions for downloading and installing the Optical Power Meter (OPM) software.
Step-by-step guide for initial setup and configuration of the PM5020.
Details on connecting and automatically recognizing Thorlabs C-Series sensors.
Explains how to configure analog output ports for measurement value monitoring.
Explains the configuration and use of the Digital I/O ports.
Details the configuration of the front BNC Auxiliary I/O port.
Setup and use of internal and external triggers for measurements.
How to operate the PM5020 directly via its controls or remotely.
How to operate the PM5020 directly via its controls.
Explains how to operate the device using the touch screen interface and gestures.
Overview of the touch screen interface elements and navigation.
Overview of the different measurement screens available.
Describes the Dual/Single channel measurement screen display.
Describes the Single channel measurement screen display.
Explains how to view calculation results using mathematical formulas.
Describes the analog needle display for measurement values.
How to set up and execute measurement logging.
Displays statistics of the currently running measurement.
Acquiring signal measurements using the scope mode.
How to change measurement settings via menus.
Accessing all possible measurement settings through the main menu.
Adjusting measurement settings via the side menu.
How to view measurements remotely via a web browser.
Options for remote control of the PM5020.
Using the OPM software for remote operation and data analysis.
Connection options (USB, Ethernet, RS232) for the PM5020.
How to export data from the PM5020 via USB.
Details the pinout and function of the sensor connector.
Pin assignment for the RS232 serial DE-9 connector.
Pin assignment for the Digital I/O connector.
Pin assignment for the Fan Control connector.
Physical dimensions of the PM5020 power meter.
Instructions for returning devices for servicing.
Thorlabs' policy regarding Waste Electrical and Electronic Equipment.
To Next Page
