To Next PageTo Next Page
Need help?Do you have a question about the Thorn security TYCO T1216W-C and is the answer not in the manual?
General| Brand | Thorn security |
|---|---|
| Model | TYCO T1216W-C |
| Category | Marine Safety Device |
| Language | English |
Manual provides installation, commissioning, and maintenance info for the T1216W panel.
Steps for installing field wiring and connected equipment as per instructions.
Steps for installing the panel itself, without connecting field equipment.
Instructions for connecting any required repeater units to the system.
Crucial safety precautions for installation to prevent damage and injury.
Critical safety warnings and guidelines for handling and using batteries.
Detailed steps for mounting and disassembling the T1216W panel enclosure.
Instructions for mounting the enclosure to a bulkhead.
Instructions for mounting the enclosure into a console.
How to connect the main AC power supply to the panel.
Procedures for installing the T1200B-C battery box.
Steps for physically placing batteries into the battery box.
How to connect the battery leads and thermistor assembly.
Details on connecting the battery box to the panel's power supply unit.
Guide for installing and connecting the C1631 repeater interface board.
Guide for installing and connecting the C1665 muster interface board.
Describes necessary modifications for interface with the WMRCP.
Details for modifying the panel for system abnormal conditions.
Details for modifying the panel for system operated conditions.
Guide for adding a fault interface relay from the T1216W-C.
Procedures for connecting the T1216W-C to the Water Mist Relay Control Panel (WMRCP).
Steps for making the final connections between the panels.
Instructions on how to change display inserts for user identification.
Step-by-step guide for replacing display inserts on the panel.
Instructions for fitting an optional door stay for the panel enclosure.
Lists required equipment for minimizing commissioning time.
Pre-commissioning checks for wiring, equipment, and documentation.
Outlines the three main stages of the commissioning process.
Detailed procedure for checking all wiring before system commissioning.
Steps to safely power up the panel after installation and checks.
Guidelines for configuring and installing intrinsically safe zones.
Describes the factory-set default configuration settings of the panel.
How to tailor panel functionality to specific vessel needs.
How to configure zones and outputs using DIL switches.
Step-by-step guide for selecting and configuring zones or outputs.
Procedure to reset zone/output configurations to factory defaults.
Warning about the time-out feature for configuration mode.
Explains conditions that lead to invalid panel configurations.
Details the functions of various DIL switches for configuration.
Lists features configurable via link positions on the motherboard.
Settings for the C1631 Repeater Interface board for quantity and address.
Configuration of the C1630 output expansion interface.
Configuration settings for the C1634 relay output module.
Guide for commissioning the panel's circuits after initial setup.
Steps for commissioning alarm circuits, including testing sounders.
Procedures for testing zone fault and fire conditions.
Notes that this is not a marine function.
How to test the Fire [Routing] output signal.
Reference to testing the Fault [Routing] Output.
How to test the Fire Protection output for controlling equipment.
Testing of remote silence, reset, and evacuate inputs.
Testing of zone outputs, disablement, evacuate, and buzzer outputs.
Commissioning steps for repeater panels.
Testing of the repeater muster link functionality.
Checks and procedures related to the power supply unit.
Commissioning the interface between T1216W-C and WMRCP.
Ensuring field conductors are secure and tidy within the enclosure.
Explains the meaning of general indicator LEDs on the panel.
Details the indications for zone status, including fire and fault conditions.
Explains the function of the keyswitch for accessing controls.
Details the functionality of each button on the user interface.
Diagram showing the layout of the main C1627 motherboard.
Diagram showing the rear of the display PCB and its connectors.
Diagram of the C1634 relay output module and its connections.
Diagram showing the C1630 output expansion interface and its configuration switches.
Diagram of the C1631 repeater interface board and its configuration switch.
Diagram of the C1665 muster interface board and its terminals.
Dimensions and details for mounting the backbox.
Dimensions and details for mounting the panel in a console.
Rear view dimensions, including cut-out and mounting holes.
Key technical specifications like dimensions, weight, materials, and finish.
Details on cable entry points and wire sizes.
Diagram showing the electrical installation of the mains AC change-over unit.
Wiring diagram for the T1216W-C panel, including mains terminal block.
Notes on modifications needed for the Watermist Relay Control.
Specification details for field relays used in wiring.
Notes on connecting remote inputs like Silence Alarms and Evacuate.
Notes on connecting remote outputs like Disablement Active.
Specifications for fire, fault, and fire protection outputs.
