Thrustmaster universal challenge - Advanced Functions and Programming; Adjusting Wheel Sensitivity; Programming Wheel and Pedals

3/10
ADVANCED FUNCTIONS
ADJUSTING THE WHEEL’S SENSITIVITY
Your wheel’s steering has 2 sensitivity modes:
- Normal sensitivity (the default mode)
- High sensitivity (must be selected)
• Selecting “High sensitivity” mode:
Action
LED
Simultaneously press and release:
the D-Pad (2) + the 2 UP and DOWN levers (7)
OFF
Your wheel’s steering is now more sensitive.
(You must repeat this procedure after each restart or disconnection of your wheel.)
• Selecting “Normal sensitivity” mode (the default mode):
Action
LED
Simultaneously press and release:
the D-Pad (2) + the 2 UP and DOWN levers (7)
ON
Your wheel’s steering has now returned to normal sensitivity (the default mode).
PROGRAMMING THE WHEEL AND PEDALS
Your wheel is fully programmable:
- All buttons, the D-pad and the Up and Down levers can be switched between themselves.
- All buttons, the D-pad and the Up and Down levers can be programmed onto the 2 pedals.
• Examples of possible applications:
- On PS2 and PS3: Program L2/R2 onto the 2 Up and Down digital levers.
- Switch different buttons for greater accessibility.
- On PS3: Program Cross/Square or L2/R2 onto the pedals.
- On GameCube™ and Wii™: Program L/R onto the pedals.
- Program a button(s) onto one or both of the 2 pedals.
• Programming procedure
Steps
Action
LED
1 Press and release the MAPPING button (3)
FLASHES
SLOWLY
2 Press and release the button to be programmed.
FLASHES
QUICKLY
3
Press and release the button or pedal onto which you wish to
place your function.
ON
Your programming is now effective.