18
A www.chariotcarriers.com 51100967
5.3 chIld Placement and seatBelt
A. Engage the parking brake.
B. Open the two-in-one cover.
C. Loosen all of the belt adjustments.
D. Undo the crotch strap buckle on the shoulder
harness by pressing the red release button.
E. Seat your child(ren).
F. Slide the shoulder belt height adjustment located
on the vertical web straps, in the seat back, to the
sameheightasyourchild(ren)'sshoulders.
(See image 1)
G. Lift up the crotch strap and connect the two
shoulder strap buckles together and then insert
them together into the crotch buckle. (See image 2)
H. Adjust the harness system using the shoulder
length adjustments until the crotch strap buckle is
positioned above their lower chest. (See image 3)
I. Snugly tighten the two shoulder straps by pulling
downward on the shoulder strap loose ends. Ensure
that there is no looseness in the harness system at
thechild'swaistandshoulders.Ensuretheshoulder
pads are positioned on top of the child`s shoulders
and next to their neck.
1
2
3
NOTICE
When seating a single child in a CX 2 always seat
the child in the right side.
WARNING
This seat unit is not suitable for children under
6 months. Use a harness as soon as your
child can sit unaided.
Do not add a pad thicker than 10 mm.
Check that the seat unit attachment devices
are correctly engaged before use.
USE & FEATURES
CX_Manual_English_100412.indd 18 09/01/13 2:36 PM
To Next Page
Loading...
Need help?
General
