THUNDER TIGER mini Titan V2 User Manual

п Main Frame Assembly-5 28818-5
No. item No. — | Description. Er] Oy
1 [BKi020 | Man Shaft Lock Rina. ПГТ]
2 |HMES3B |SetScrewM3X8 AIAAARNMIXI
3 |HMC2-:14B | Socket Screw M2X14 [T TIENDE
4 [нм2 M Nut. MARE
‚ Slide the main gear set into the main frame set.
Insert the Main Shaft into the Upper Bearing
Housing, main gear set & Lower Bearing Housing.
Line up the holes of the Autorotation Tall Drive.
Gear, One Way Bearing Shaft & Main Shaft, and
then insert the Socket Screw to fix them with a M2
Nut. Add a drop of threadlocking when securing,
but do not over tighten.
Attach the Main Shaft Lock Ring on the end of the
Main Shaft. Secure the ring by a Set Screw with a
drop of threadlocking, note there should be no play
of the Main Shaft.
ЖЕМИН ЛАВЕ <
ЗЕ RIDERS EBORE ЗЕНА БЫ КЕЖЕ °
HEREDA Ваа БАЕ E TL (UR FA
Pa NRAKA DIL Ей, ВЕ АРЗА BENG NAN EA -
ERI ИВЕ SANAK
N
a °
ем
4.
1E
еи, ЗЕТЕ LE FSB) 2 ERIT °
Apply threadlocker
BERRADE
W Tail Boom Bracket Set-1 BEATE R-1
No. | tem No. | Description. E Oty | [No] item No. — Description
#1 |BK2610 | Tail Boom Bracket REEERE 1 |[+2 [BK1886__| Bracket Spacer
Loose the screw at this step for the belt adjustment later.
SAADAH Rin EIB AA ^ ARESE ^
*
The images are for illustration only and may vary from the actual item, (2)
which depends on the version of your original mini Titan E325.
ЖЕНАТА, ВР: ЗАА Umini Titan ЕЗБЕ АЗЕ >
-5-

THUNDER TIGER mini Titan V2 Specifications

General

Brand	THUNDER TIGER
Model	mini Titan V2
Category	Toy
Language	English