THUNDER TIGER mini Titan V2 User Manual

W Tail Boom Bracket Set-2 2 12183-2
No. | item No. — | Description. Er] Qy
*1 |HNX20B | Socket Button Head Sef | аруа | 4
Tapping Screw M2x10 — | m2x10
*2 |81889 — | Frame Spacer таз 1
*3 |HMC2-0B | Socket Screw M2X10 yea XI) | 2
Tail ! AE
`
- 9%
Tail шеу.
EM
$
Т2 a
Drive Gear Set © Nose / #58.
рена С
Ensure the leading edge of the blades rotate
this way as drawing. (Turn the Main Gear
clockwise, the main rotor grips turns clockwise
and the Tail Blades turn counter clockwise.)
TEGERE E BERI P RD REESE °
(IEEE 75160888) E ER BRI ^ ЕЛЕУ НН ЖЕБЕЙИН
$t ` FEE RERO BED ° )
1. Insert the tail unit into the main frame set, twist
the belt toward right for 90* and then warp around
the pulley.
2, First tighten the 4 upper Tapping Screws to attach
the Tail Bracket on the main frame set.
1. ЖЕБЕ Л} БИН, TERAH BIMA TG ВОО
t I -
2. EIEI LAPIRA ^ ИЛЕ АЕ SIRE TE
За E ^
Apply threadlocker
НЕЛЕ
No. | item No. — [ Description. Er] Qu
wi [HSA26 | Button Head Socket Screw, | ШАЙ dti 4
M26 M2X6
"Ed
f^ Screw Driver
имет
W Tail Boom Bracket Set-3 Е 1285-3
1. Pull the Tail Boom out slightly by grasping the Tail Unit
with one hand and the main frame set with the other.
Adjust until the belt deflects by about 0.2mm (0.087).
2. Tighten the 4 lower Tapping Screws to fix the Tail Bracket
on the main frame set.
3. Adjust the Bracket on the Tail Boom to a proper position,
апа then tighten the screw to fix it.
1. ЗЕЕ ЕАН ^ 53— SEM CERE BING ШУЫП , BIZ
ШИШЕ WAB KINA A BE D HE BRE БОРБУК ТА
0.2mm(0.08" ) •
2. ME FIERA. NAAR SE НЕЕ gz ELE EE[E ze Jo ERR -
3. WERE SE HERES 006 RS (C QE e ^ ИЗИП -

THUNDER TIGER mini Titan V2 Specifications

General

Brand	THUNDER TIGER
Model	mini Titan V2
Category	Toy
Language	English