THUNDER TIGER mini Titan V2 User Manual

m Electric System-3 271-3
No. [ftem No. | Description 28 Оу
#1 [HMC288 | Socket Screw BABERMXS |4
1. Remove all the servo wheels prior to attaching the Linkage Balls.
2. Mount the Linkage Balls at 12.5mm from the center of the servo arms.
8. Secure the servos to the left and to the back, attach the rods to the servo arms.
1. (fs) BERE ЕЭЗ ЬЕ (а ЙЕНЕ F. ^ oH UR °
2. KABAR DA o ВЕНЕ pun (i8 12. 5mmiit <
3. WESERGIH GR zi (RR AN ЧЕБЕЛЕНЕ ДЕ КЕЛЕ ERR] ^ VE; ib E ^ (ЕНЕНЕ НЩ ПИНК)
tail НЕМЛ
Must be purchased separately Im Apply threadlocker
m Electric System-4 &-fi-4
1. Attach the receiver, gyro to the Main Frame by two-sided rubber.
No. [tem No. | Description 28 бу
*1 |BK2605 — | Receiver Tray ETC 1 | 2. Insert the Antenna Tube and fix it by the Rubber Tube.
«2 |HNX28B [Socket Button Head Sef | ¥mmanseme | 4 | 1. KEREN ТЕЕ тн ` БЕШЕНЕНЕ -
Tapping Screw, M2X6 M2x8 2. КЕШЕН ЕЕ °
Gyro / eee
wo-Sided Rubber / lige
Secure the receiver with straps to
prevent it from being ejected.
KENAA Pi КЕЕ, ALE
The images are for illustration only and may vary from the actual item, Rim °
which depends on the version of your original mini Titan E325.
BANK. РН: BARMIN Titan ЕЗ25А& Z8 <
Must be purchased separately
URBES
-8-

THUNDER TIGER mini Titan V2 Specifications

General

Brand	THUNDER TIGER
Model	mini Titan V2
Category	Toy
Language	English