Operation
On-Off Tare
Up
Weigh Kg/lbs
Settings Mode
OK
Back Down
Load cell 1 Load cell 2
The T10 has a water resistant 10 button keypad for a user interface. An extra large
40mm digit display provides the user with the ability to view the weight at a distance.
The display also has other indications that are used at various times. All mode settings
and changes are memorized at the time of change, so that the indicator will return to the
previous set up when it is turned on.
The T10 contains highly stable and sensitive circuitry, which is designed to improve
accuracy.
Following is a description of each button and what it does:
Off/On
This button does what it says. There is no power drained from the batteries when the
scale is turned off.
When powering up, the indicator will display all relative segments for a short time, then
the firmware version number, and then a tare is performed automatically after a short
delay. If there was a weight on the load bars when the indicator was turned off, this
weight is displayed if it hasn’t changed, otherwise zero weight is displayed. The scale is
To Next Page
Loading...