2) Stored Maximum Pressure:
Press Mode-Key again:
After two more seconds the stored maximum pressure is displayed:
Without further keystroke: return to 1) after 4s.
3) Stored Minimum Pressure:
Press Mode-Key again:
After two more seconds the stored minimum pressure is displayed:
Without further keystroke: return to 1) after 4s.
4) Delete Memory:
On further keystroke the stored Min-/Max-values as well as the data memory are
deleted.
Without further keystroke: return to 1) after 4s.
5) Data Logger Mode:
The actual pressure is displayed.
The data memory is deleted. The VD84 is in Data Logger Mode and from now on
stores new extremal pressure values and –if applicable- up to 2000 measurements
with the preset logging rate (see chapter 5.1).
To Next Page
Loading...
