Timed run: refers to a user-specified time periods, perform pre-programmed functions,
such as preset, the cruise path path, mode, and scan.
A1. region indicate state information.
B1. regional group number
Move the cursor to "regional groups" aperture setting mode, open access to regional
groups, sets, rocker bottom for regional groups. Dome area indicates the total supporting
8 group.
C1. Title settings
Move the cursor to "headers", as the Aperture open access to regional direct title settings
submenu, zone indicates that the title is set. Note: the current title set is on the WEB.
D1. Set the left border
Move the cursor to "set the left edge" by aperture space into regions indicates that left
border setting mode, appears on the screen "press IRIS open to confirm ...".Users can
operate on the dome, reaches the desired position and press IRIS open-storing the
current location for the area indicates that left border.
E1. Set right margin
Move the cursor to "set right", press the stop key to enter the area indicates that open
borders to set mode, appears on the screen "press IRIS open to confirm ...".Users can
operate on the dome, reaches the desired position and press stop key stores the current
location for the area indicates that open borders.
F1. Delete
Move the cursor to "delete", press the aperture on corresponds to a region, regional
groups.
To Next Page
Loading...
