6.2 Coupling and uncoupling the sweeper
Start-up
32
1) Undo the wing bolt on the quick-change mecha-
nism guard.
2) Pull the sweeper over to the lawn tractor.
3) Li the guard and position the sweeper.
5) Tab before locking.
4) Mount the sweeper.
6) Push the coupler handle down at an angle.
DANGER!
Switch off the engine. Secure the lawn tractor against being started inadvertently or rolling away.
WARNING:
If the drive set is not used, the guard on the quick-change mechanism with drive must be secured
using the wing bolt.
Tab
Read the operating instructions provided by the lawn tractor manufacturer.
To Next Page
Loading...