Read the operating instructions
1.2 Warnings and symbols
WARNING:
Indicates a potentially hazardous situation. If this instruction is ignored, there may be a
risk of death or extremely serious injury.
CAUTION:
Indicates a potentially hazardous situation. If this instruction is ignored, there may be a
risk of minor injury.
IMPORTANT:
Indicates operating tips and other useful information.
5
Operating and installation instructions
Work on a workbench
Do not use a tool
DANGER!
Indicates an immediate threat of danger. If this instruction is ignored, there is a risk of
death or extremely serious injury.
Symbol
Type
Quantity
2x M8 x 20
Symbol
Bolt
Washer
Nut
Combination spanner
Hexagon head screwdriver
Screwdriver
Crosshead screwdriver
Type
Examples:
M8 x 16
8,1 - 58 - 5
M8 (L)
8
PZ 2
PH 2
Explanation
M = Metric
S = Diameter in mm
16 = Length in mm
8.1 = Inner diameter
58 = Outer diameter
5 = Material thickness in mm
M = Metric
8 = Inner diameter in mm
(L) = Lock nut
8 = Size in mm
PZ 2 = Pozidriv size 2
PH 2 = Phillips size 2
To Next Page
Loading...