TIELBURGER tk 520 - 3 HuvrqqhoVhohfwlrqDqgTxdol¿FdwlrqvEdvlfReoljdwlrqv; Position of Safety Stickers and Labels

7
2.3 Personnel selection and qualications; basic obligations
Work on/with the product may only be carried out by
reliable personnel. Observe the legal minimum age.
Only use trained or instructed personnel and clearly
dene the responsibilities of the personnel for opera-
tion, set-up, maintenance and repair.
Ensure that only authorised personnel work on the
product.
Only allow personnel who are yet to complete training,
instruction and induction or who are still completing a
general apprenticeship to carry out work on the prod-
uct under the constant supervision of an experienced
person.
Work on the product's electrical equipment may only
be carried out by a qualied electrician or by trained
personnel under the guidance and supervision of a
qualied electrician in accordance with electrical en-
gineering regulations.
Work on chassis, braking and steering systems must
only be carried out by qualied personnel trained for
such work.
Only personnel who possess specic knowledge of and
experience in hydraulics are allowed to carry out work
on hydraulic equipment.
Clean the implement regularly, particularly in the ex-
haust and engine area. Otherwise, there is an increased
risk of re.
Basic safety instructions
2.4 Position of safety stickers and labels
Caution:
Hot surface
Do not open the pro-
tective equipment,
risk of crushing