SAFETY INSTRUCTIONS
In case of a model without the ON/OFF switch, place the device as close as possible to the 230V
wall outlet. The mains plug must be easily accessible.
Do not place the system where the power cable can
be stepped on.
Do not place objects on the power cable.
If you need to disconnect the power for maintenance
operations, be sure to unplug the power cable from
the wall socket.
GSM antennas or RF, where the router model requires
their use, must not be placed in a stable manner at a
distance of less than 20 cm from all persons.
SIM INSERTION/EXTRACTION
(only for models in which it is provided)
Refer to the SIM Installation User Guide, available on Tiesse's website: http://www.tiesse.com
CAUTION! Before removing the cover:
Turn off the device
Unplug the telecommunication cables (xDSL, ISDN)
Unplug the power cable from the wall socket
Unplug GSM or RF antenna if present
After you worked on the router:
Close the device and secure the cover as shown in the instructions
Plug the power cable into the wall socket
Plug the telecommunication cables (xDSL, ISDN)
Plug GSM or RF antenna if present
Turn on the device
IN CASE OF MALFUNCTION OF THE DEVICE
Do not intervene, in any way, on the device
Contact Tiesse via e-mail at support@tiesse.com to begin the process of repair or
replacement under warranty.
To Next Page
Loading...
