Tiesse Levanto 410 - Power Supply; Operative Conditions

Modem Levanto hardware features Levanto Quick Start Guide
8
POWER SUPPLY
Levanto can be equipped for DC-DC connection. Depending on customer requirements, it can be
equipped with external power supply or with power cable. The latter is made by a two-color twisted
pair (red for positive and black for negative) of section> 0.75 sq mm and length of 0.5 (or 1.5)
meters. The cable is stripped and tinned at one end and has a quick coupling male connector at the
other one.
Power supply
Mod.
100
Mod.
110
Mod..
310
Mod..
410
Mod..
141
9 - 30 Vcc
x
x
x
5V AC/DC Adapter
x
5V (9-30 VCC optional)
x
Power consumption
< 3W
< 3W
< 5W
< 5W
< 5W
OPERATIVE CONDITIONS
We do not guarantee the correct working if you don't respect the climatic conditions and the
functionalities specified before.
Conditions
Mod.
100
Mod.
110
Mod..
310
Mod..
410
Mod..
141
Operating temperature -20°C / +70°C
x
x
x
Operating temperature -5°C / +50°C
x
Operating temperature -5°C / +55°C
x
Storage temperature -40°C / +70°C
x
x
x
x
x
Max operating humidity: 93% non condensing
x
x
x
x
x
Connectivity features
Mod.
100
Mod.
110
Mod.
310
Mod.
410
Mod.
141
HSUPA
Frequency band: Triple band (850/1900/2100 Mhz)
x
Max download transfer in Mbps
7.2
Max upload transfer in Mbps
5.76
UMTS/HSUPA 3GPP release 6
x
PORTE
RS-232 Asynch Serial ports with DB9 connector, up to 115.2 Kbps - RJ45
4x
RS-232 Asynch Serial ports with DB9 connector, up to 115.2 Kbps
1x
1x
1x
1x
Console DB-9 Asynch up to 115.2 Kbps
x
Console on serial port 1
x
RF module for wireless communication at low frequency (868 Mhz)
x