EasyManuals Logo

Tiger JAX-R18U User Manual

Tiger JAX-R18U
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
35
34
35
34
English
Removing and attaching the steam cap
Removing the steam cap
1
Insert your nger into the hole
in the lid and lift the steam cap
upwards.
Steam cap
2
Turn the inside portion of the
assembly as shown in the
illustration to loosen it.
3
Lift up on the inside portion to
separate it from the cap.
Attaching the steam cap
1
Set the inside portion of the
assembly on top of the cap
portion.
2
Turn the inside portion of the
assembly as shown in the
illustration to tighten it.
Align the markings.
3
Attach the steam cap back in
the lid.
Installing the steam cap gaskets
If the gaskets are loose, refer to the illustration and set them securely into place. If the gaskets are not set
securely, they can become loose and may result in problems due to steam leaking out, etc.
Steam vent
gasket
O-ring
Cleaning the lower heating plate
Water drops may fall from the inner lid during cooking and cause the surface of the lower heating plate to
become dirty. This will not affect the performance of the rice cooker but, if you would like, you can clean the
heating plate using the following procedure.
1
Add a bit of standard kitchen
cream cleanser to a nylon
scouring sponge, and remove
the surface dirt.
2
Wipe clean with a damp paper
towel or cloth.
Nylon scouring sponge
Heating plate

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tiger JAX-R18U and is the answer not in the manual?

Tiger JAX-R18U Specifications

General IconGeneral
BrandTiger
ModelJAX-R18U
CategoryRice Cooker
LanguageEnglish

Related product manuals