What to do if nothing happens when I press a key on my Tiger Rice Cooker?
First, make sure the power plug is fully inserted into the outlet. If that doesn't work, press the [KeepWarm/Cancel] key to turn off the Keep Warm function, and then try your operation again.
What to do if rice was not cooked completely by the preset time in my Tiger JAX-S Rice Cooker?
First, make sure that you have set the correct present time. If the issue persists, check “The cooking time is excessively long” under “If Rice Does Not Cook Properly” and take the necessary action.
What to do if the lid of my Tiger JAX-S Rice Cooker will not close or opens during cooking?
Completely remove all remaining rice from the rice cooker. This should allow the lid to close and remain closed during cooking.
Why does my Tiger JAX-S Rice Cooker lose time settings when unplugged?
If “0:00” blinks on the display when the power plug is connected again, the lithium battery has run out. Contact the place of purchase.
Why is the display on my Tiger Rice Cooker blurred?
Completely remove all remaining rice. Then, wipe the display with a dry cloth. This should resolve the issue.
Why does my Tiger JAX-S Rice Cooker beep three times when I set the Timer function?
Continue setting the Timer function. The beeping is part of the normal timer setting process.
General| Model | JAX-S |
|---|---|
| Type | Micom Rice Cooker |
| Keep Warm Function | Yes |
| Capacity | 1.8L |
| Material | Plastic |
| Features | Removable Inner Lid |
| Power Supply | AC 120V, 60Hz |
| Cooking Functions | Brown rice |
| Timer | Yes |
| Inner Pot Material | Aluminum |
To Next Page
