01 02
0.GENERAL SECURITY CONSIDERATIONS
About safety warnings
It is essential to read, understand and follow the warnings and safety regulations before handing
the product. They have been published in order to prevent the following hazards:
ATTENTION:
Failing to follow these instructions may result in a malfunction or damage
to the equipment.
DANGER:
Failing to follow these instructions may cause a serious personal injury or
death hazard by electrocution.
ATTENTION:
Read the instructions carefully before installing or using this product.
DANGER:
Failing to follow these instructions may result in serious personal injury or
death hazard.
1.INTRODUCTION AND SECURITY
Purpose of this manual
The purpose of this manual is to provide necessary information to:
● Install
● Handle
● Operate
● Perform maintenance operations
1.1. Introduction
The following symbols next to a paragraph indicate the possibility of danger as a result of fail-
ure to observe the prescriptions:
● Personal accidents and health problems.
● Damage to the product and/or the system.
● Product malfunction.
ATTENTION:
Save this manual for future reference, and keep it readily available at the
location of the unit.
ATTENTION:
Read the instructions carefully before installing or using this product.
DANGER:
Any wrong use of this product may cause personal injuries and/or
property damages, and may also void the warranty.
DANGER:
Inexperienced users
Be aware of the following precautions:
● Persons with diminished capacities should not operate this product unless they are super-
vised or have been properly trained by qualified personnel.
● Children must be supervised to ensure that they do not play on or around the product.
1.2. Disposal of packaging and product
This product or parts of it must be disposed of in an environmentally sound manner.
1. Use public or private waste disposal services.
2. If not available, contact Tigerflow.
1.3. Warranty
For further information about the warranty, refer to the sales contract.
Installation, Operation and Maintenance ManualInstallation, Operation and Maintenance Manual
1.INTRODUCTION AND SECURITY
To Next Page
Loading...