Page of 8
Thank you very much for choosing a Timber Tuff product. For future reference, please complete the owner’s
record below:
Model: Purchase Date: _______________
Save the receipt, warranty, and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This product is designed for certain applications only. The manufacturer and/or distributor cannot be
responsible for issues arising from modification. We strongly recommend that this product not be
modified and/or used for any application other than that for which it was designed. If you have any
questions relative to a particular application, DO NOT use the product until you have first contacted
the distributor to determine if it can, or should, be performed on the product.
For technical questions, please call 218-943-6290.
TECHNICAL SPECIFICATIONS
GENERAL SAFETY RULES
Read and understand all instructions. Failure to follow all instructions listed below may result in serious
injury. Do not allow persons to operate or assemble this tenon cutter until they have read this manual
and have developed a thorough understanding of how the tenon cutter works.
WARNING:
• A single-speed, gear-driven drill with RPMS of 500 or less is recommended. Exceeding these
RPMS may result in damaged parts.
• Please wear safety glasses, dust mask, heavy-duty work gloves, and other personal protection
items you require when you are using the tenon cutter and drill.
• Do not use this tenon cutter while you are tired or under the influence of drugs, alcohol, or
medication.
• Before installing/removing the tool, the drill should come to a complete stop.
• When cutting tough dry logs, side loading the tool could cause the shank to fail or may result in
blade damage.
• The log must be fixed on a log vise or clamp when starting your drill, failure to do may result in
bodily harm.
Attaches to a 1/2in. or larger drill
Solid aluminum construction with a durable powder-coat finish to
resist corrosion
To Next Page
Loading...