Page of 8
MAINTENANCE:
Please keep the tenon cutter body clean of sap and build-up. Before cleaning, remove the blades from
the tool first. Carefully clean the tool with the solvent or cleaner of your choice. Dry the tool when you
are finished.
The blades are made from high-speed steel, and may form oxidation, kindly note that this is natural
occurrence and it will vary depending on your geographic location, climate and shop environment. You
should periodically clean the blades and apply a thin film of oil. When you re-sharpen the blades, it is
recommended to apply a thin film of oil.
WARRANTY
One-year limited parts warranty
BAC Industries
PO BOX 155
Miltona, MN 56354
Made in CHINA
To Previous Page
Loading...
