What to do if my Timberk Air Conditioner shows error E4?
If your Timberk Air Conditioner displays 'E4', it means the water tank is full or the plug isn't correctly connected. To fix this, remove the rubber plug at the bottom of the unit to drain the water. After draining, double-check that the plug is properly connected.
Why is my Timberk AC TIM 07H P4 not turning on?
Your Timberk Air Conditioner might not be turning on because the condensate collection tray is full, as indicated by a flashing tank fill-up indicator. Empty the water from the tray. Alternatively, if you're in heating mode, the room temperature might be higher than the set temperature. Adjust the temperature setting accordingly.
Why does my Timberk AC TIM 07H P4 Air Conditioner switch to heating mode?
The Timberk Air Conditioner switches to heating mode because automatic overheating protection has been activated. This happens when the outlet air temperature exceeds 70°C. To resolve this, wait for the air conditioner to cool down before turning it back on.
Instructions for cleaning the air filter using vacuum cleaner and warm water.
Instructions for cleaning air intake vents using a vacuum cleaner.
Instructions for cleaning the external casing with a damp cloth.
Explanation of how condensate is automatically removed from the unit.
Specifies the required temperature range for transportation and storage.
Specifies the required humidity range for transportation and storage.
General| Brand | Timberk |
|---|---|
| Model | AC TIM 07H P4 |
| Category | Air Conditioner |
| Language | English |
To Next Page
