Z
zyoderAug 4, 2025
What to do if Timberk T-AC07-S27-Y Air Conditioner stopped working after a power failure?
- KKaren HoAug 4, 2025
If your Timberk Air Conditioner isn't working after a power outage, wait for the power to be restored.
To Next PageTo Next PageWhat to do if Timberk T-AC07-S27-Y Air Conditioner stopped working after a power failure?
If your Timberk Air Conditioner isn't working after a power outage, wait for the power to be restored.
How to improve cooling if there are other heat sources when using Timberk Air Conditioner?
If your Timberk Air Conditioner isn't cooling properly, and there are other heat sources in the room, remove them.
What to do if remote control batteries are exhausted in Timberk T-AC07-S27-Y?
If your Timberk Air Conditioner's remote control isn't working, replace the batteries.
What to do if air inlet or outlet of Timberk T-AC07-S27-Y are blocked?
If your Timberk Air Conditioner isn't cooling well, and the air inlet or outlet of the indoor or outdoor unit are blocked, remove any foreign objects from the inlet and outlet.
How to turn on display on Timberk Air Conditioner?
If your Timberk Air Conditioner display is off, disable the active LED function.
What to do if Timberk Air Conditioner has loose connections?
If your Timberk Air Conditioner isn't working because of loose connections or the plug being pulled out, contact an authorized service center or plug in the device.
General| Type | Split System |
|---|---|
| Cooling Capacity | 7000 BTU/h |
| Refrigerant | R410A |
| Noise Level (Outdoor) | 50 dB |
| Power Supply | 220-240V, 50Hz |
| Weight | Not Applicable |
| Dimensions | Not Applicable |
Instructions for mounting the indoor unit, wall penetration, and pipe connections.
Guidelines for positioning the outdoor unit and connecting refrigerant lines.
Details the basic control button on the indoor unit for emergency operation.
Describes the functions and usage of all buttons on the remote control.
Steps to activate and utilize the automatic operation mode for climate control.
Instructions for setting and using the cooling and heating functions.
Steps to activate and use the fan-only operation mode.
Instructions for activating and using the dehumidifying (drying) mode.
Guidance on cleaning units, remote, and preparing for extended periods of non-use.
Detailed instructions for removing, cleaning, and reinstalling the air filter.
Lists typical problems, their probable causes, and recommended solutions.
Identifies critical situations requiring immediate power disconnection for safety.
