IM2022
50
4. When the timer is set, it will begin to count down immediately, the display will show the
remaining time.
NOTE: The red dot next to power level indicator will illuminate for those zones be set with timer.
You can check timer setting of different cooking zone which set with timer, by active this cooking
zone.
NOTE: If more than one heating zone has timer setting, the timer indicator will show the lowest
time. The red dot next to power level indicator will flash.
5. When cooking timer expires, the corresponding cooking zone will be switch off automatically.
Note: The default setting of minute reminder and timer is 30 minutes.
Note: After adjusting, the setting in timer indicator will flashing for 5 seconds and then stop
flashing, then the setting be confirmed.
Note: The minute reminder and timer can be use at same time, timer indicator shows the lowest
time setting. If the lowest setting is minute reminder, the red dot next to timer indicator will flash.
If the lowest setting is timer setting, the red dot of corresponding cooking zone power level
indicator will flash.
Note: If indicator shows timer setting of cooking zone. To check minute reminder setting, press
the timer control button , the indicator will show minute reminder setting.
To Next Page
Loading...