Timberk T-HE2GL65 - Page 51

IM2022
51
Residual Heat Warning
Beware of hot surfaces
When the hob has been operating for some time, there will be some residual heat. The letter “ H
”appears in power setting indicator to warn you to keep away from it.
It can also be used as an energy saving function:
if you want to heat further pans, use the hotplate that is still hot.
Auto Shutdown
Another safety feature of the hob is auto shutdown. This occurs whenever you forget to switch
off a cooking zone. The default shutdown times as below table:
Power
level
1
2
3
4
5
6
7
8
9
Default
working
timer
(hour)
8
8
8
4
4
4
2
2
2
Over-heat Protection
A temperature sensor equipped can monitor the temperature inside the hob.
When an excessive temperature is monitored, the hob will auto stop operation.
Over-flow Protection
For your safety, the programmer will auto shut off the power if liquid boiling or wet cloth over
touch control panel. All control buttons became invalid except ON/OFF and Child Lock button,
unless you wipe the touch control area dry.
Cooking Guidelines
Take care when frying as the oil and fat heat up quickly, particularly if you are using Booster
function. At extremely high temperature oil and fat will ignite spontaneously and this presents a
risk of fire.
Heat Settings
The settings below are guidelines only. The exact setting will depend on factors including your
cookware and the amount you are cooking. Experiment with the hob to find the settings that best
suit you.