Timberland WHATELY - Countdown Timer Settings; Countdown Timer Operation; Countdown Time Configuration; Metronome Mode Usage

6. Countdown Timer Mode
- The maximum countdown range is: 99 hours, 59 minutes and 59.99 seconds.
- In the countdown timer mode, press buon E to run/stop, press buon C to return
your seing value when it stop.
- When countdown to 0, the alarm will sound BB.BB.BB..for 30 seconds.
Set the counting down timer: In the counting down mode, press and hold buon B for 2
seconds, Hour flashes, entering counting down seing mode.
- Press buon B to select the following items for seing sequentially:
- Press E to increase the value, press and hold E to advance quickly.
- Press C to decrease the value, press and hold C to decrease quickly
B for 2s 2s later B B
Countdown Timer Mode “HOLD” Flashes Set Hour Set Minute Set Second
B
- Keep pressing B for 2s to exit.
- It will exit seing mode when no any key pressing for 1 minute.
7. Metronome Mode
B for 2s E
Pacer Mode
“HOLD” Flashes Set Pace
- In the metronome mode, press E to turn it on/off
- When it stops, press C for 2s to reset
- If the metronome is not stopped, it will start from 0 again when reaches 99999
- In the metronome mode, keep pressing B for 2s to enter its frequency seing (30-180)
- Press E to increase the value, press and hold E to advance quickly.
- Press C to decrease the value, press and hold C to decrease quickly
- Keep pressing B for 2s to exit.
- It will exit seing mode when no any key pressing for 1 minute.