Timberwolf TW150DHB User Manual

Environmental Manufacturing LLP, Entec House, Tomo Industrial Estate, Stowmarket, Suffolk IP14 5AY
Telephone: 01449 765800 Fax: 01449 765801 Email: info@timberwolf-uk.com www.timberwolf-uk.com
timberwolf-uk.com
TW150DHB & TW190TDHB
WOODCHIPPERS
SAFETY INFORMATION
AND BASIC OPERATING
INSTRUCTIONS
Safety instructions
1. Before using this chipper, take time to read this safety and user’s guide completely.
Misuse of this equipment can cause personal injury, equipment damage,
damage to property and bodily injury.
2. Familiarise yourself with the machine prior to use.
3. Do not attempt to start or use this machine if it is damaged. Contact the hire
outlet before proceeding.
4. Do not allow minors, or anyone who is unwell or under the influence of drugs
or alcohol to use this machine.
5. Diesel fuel is flammable. Do not smoke when operating or refuelling.
6. This chipper is designed to chip solid wood material up to 150mm in diameter
(150DHB models) or 190mm (190TDHB model). Do not feed larger wood or
other foreign material into the chipper.
7. Wear appropriate personal protective equipment (PPE). This includes face and
eye protection and work gloves with snug cuffs. Noise levels above 85dB(A)
will be experienced at the working position. Wear ear protection in compliance
with EN352, with a SNR of 15dB or above. The use of a face mask is
recommended if working conditions require. Do not wear loose clothing,
jewellery or anything that could create a snag hazard.
8. Maintain a safety-exclusion zone around the chipper of at least 10 metres.
Stop operations and turn off machine if unauthorised or unprotected individuals
breach this zone.
9. Be aware that the chipper can eject chips out of the feed chute with considerable
force. Always wear full head and face protection.
10. Only use this chipper in a well-ventilated area.
(Guaranteed Sound Power 119dB (A).

Timberwolf TW150DHB Specifications

General

Brand	Timberwolf
Model	TW150DHB
Category	Chipper
Language	English

Summary

Woodchipper Safety and Operation

General Safety Instructions

Key safety guidelines for operating the chipper, emphasizing reading the manual and safe practices.

Understanding Chipper Systems

No Stress System Explanation

Explains the 'No Stress' system that controls feed rate based on engine workload.

Roller Control Box Functions

Details the operation of the feed roller control box, including green, red, and blue buttons.

Safety Stop Bar Functionality

Describes the safety stop bar surrounding the feed funnel and its emergency stop function.

Operating Procedures

Pre-Start Checks

Essential checks to perform before starting the woodchipper, including safety gear and area clearance.

Starting and Stopping the Engine

Step-by-step guide for starting and safely stopping the chipper's engine.

Chipping Wood Safely

Guidelines for feeding wood into the chipper, including diameter limits and safe handling practices.

Troubleshooting and Maintenance

Clearing Blockages

Procedure for safely stopping the engine and clearing blockages in the chipper.

Machine Condition and Damage

Requirements for returning the machine clean and reporting any damage incurred.